How Long Does It Take To Learn To Penny Board Reddit

Penny Boards are pocket-sized, skateboards that are light-weight, piece of cake to carry, and available in every color imaginable. Today, we volition look at Penny Boards to assistance you decide if they good for beginners.

Are Penny Boards skilful for beginners? It depends, a 32″ Penny Board is fine for beginners only the 22″ and 27″ variants are too small and unstable for new skaters. Another downside is that they are slippery and the flexible deck makes it harder to continue your balance.

Your anxiety will stick out and your legs volition be closer together compared to regular-sized skateboards. Don't brand the fault of starting out on a small Penny lath.

What is a Penny Lath?

Penny Skateboards is an Australian-based company founded in 2010 by Ben Mackay. They make skateboards in 3 sizes: Penny (22" long deck), Nickel (27" long deck), and the cruiser variant (32" long deck).

At that place are been many companies that offer plastic skateboards and as a result, most whatever plastic skateboard is referred to as a Penny Lath We will be referring to the 22" Penny Board for our word.

A Penny Lath is a small, light, moulded plastic deck skateboard, which are often sold every bit a complete setup (deck, wheels, and trucks preassembled) in skateshops, but y'all tin can also buy the components separately, and pattern your platonic setup.

They have broad (virtually 3" wide), soft (83a on the durometer scale), 59mm diameter polyurethane wheels with a plastic core.

Penny Boards also utilise a ABEC 7 bearing, which is a fast (ABEC doesn't really thing) and a quality begetting. The truck hangars are 3" broad and designed for use with the Penny Board, to make it plough sharply and perform as intended.

The Penny Board shape is very classic, or "retro". The shape is based off some of the original skateboards in the 1960's and 1970's. They are quite narrow (most six-seven" at the widest), have a somewhat pointed nose, reaching its maximum width after the front truck bolts, and gradually narrows back down to the tail. They take a kicktail, but at that place is no kick on the nose. The front trucks are as well fix quite close upwards to the stop of the nose.

Penny Boards are available in almost any colour imaginable. They are also available with screened graphics their deck bottoms. A Penny Board does non have griptape, instead it has a "waffle grip design" moulded to the acme as part of the deck manufacturing procedure.

What Are Penny Boards Used For?

Penny Boards were designed as cruiser boards, and are quite good for commuting. They are small and lightweight and then they can easily fit in a haversack.

The wheels are larger and softer than most street/park skateboards, so they are able to tackle cracks, pebbles, and rougher terrain. Much easier than with a smaller and harder street wheel.

Usually street wheels accept a hardness betwixt 99a-104a, and a size of 50mm-56mm. The light size, large soft wheels, and bearings allow the rider to become some fast speeds on this board, with minimal pushing, and a nice smooth ride.

The tail kick also allows the rider to lift up the front hands when going over curbs and big cracks. They are perfect for cruising!

Is a Penny Board Good for a Consummate Beginner?

This is a 2 part answer:

Maybe- for a small and young beginner, a Penny Board would exist an option to learn fundamentals, similar balance, and how to push button, turn and prowl around. Considering the wheelbase is then small, and the wheels are fast, a Penny Board can almost turn on a dime (or meliorate yet a penny!).

They are congenital for cruising, and cruise very well. If y'all learn to prowl and carve tight and fast on a Penny Lath, y'all should have acquired the skills to ride almost whatsoever other board shape comfortably, with some adjustments to your stance.

NO- Because it is and so small, and fast, the Penny Lath is not very stable. The trucks are adjustable, and so you can tighten them to add stability, however, considering it is but 22" long, your anxiety are placed close together, and y'all are not able to crouch equally easily as y'all could with a longer board.

Having a wider, more crouched stance, makes the skater more stable than a narrow, more than upright opinion. For an developed, or anyone with anxiety over size nine, the Penny Board will probably be as well small to experience comfortable on, and volition take more attempt to be able to acquire to ride with whatsoever stability.

Are Penny Boards Skilful for Learning Tricks?

This is a 1 part reply:

NO- The Penny Boards are not a good option for beginners learning how to do tricks; they are built for cruising, not for performing advanced tricks.

On a Penny Board you tin learn tricks similar pushing, riding switch, kicking turns, power-slides, manuals, layback carves (laying back/forward and carving hard with a hand on the ground), and rolling off of curbs.

Tricks where you don't leave the ground, are probably nearly all you could learn to do, as a beginner. In that location are video clips of people doing kickflips and Tre-flips on Penny Boards, but most likely those skaters didn't learn to practise those tricks on a Penny Lath kickoff.

Given the small-scale size, soft wheels, no griptape, and merely one kick, y'all will struggle to larn how to exercise technical tricks that require an ollie, or flipping the board, equally the small Penny Lath is difficult to grab and land back onto.

Grinding tricks would besides be very difficult to larn because the lath and trucks are very narrow, and the wheels are large, soft, and wide, so "locking in" to the grind volition be very difficult.

When to Go a Penny Board

A Penny Board is an option for someone smaller that wants to learn how to ride a skateboard, merely non acquire advanced tricks. For beginners, especially smaller people, the Penny is an excellent option for learning balance, pushing, turning, etching and basic fundamentals.

Keep in mind that it'south a lot harder to learn skateboarding on a minor Penny board compared to a popsicle skateboard.

If you are looking to learn how to prowl, for commuting to piece of work, the corner shop or to school, with a smaller lighter board that volition fit in your backpack, locker, or under your work desk-bound, the Penny Board is a terrific choice.

If you are a kid with bigger feet or an adult, a larger Penny Nickel Lath would be a better choice for you than the smaller Penny Board.

Are Penny Boards Cheaper?

Not really. penny skateboards has its complete models listed for about $90 – $119 USD. A decent complete "popsicle shape" trick skateboard sells for about $60 – $70 USD for a blank complete, and a higher-cease consummate, with a graphic deck, and branded trucks and wheels for between $100 – $120 USD.

An official Penny Board is a branded consummate, and the price is comparable to a branded complete from companies like Santa Cruz, or Birdhouse.

Note: As an Amazon Associate I earn from qualifying purchases.

You tin check out current prices at Amazon by clicking here.

Decision

If you are a beginner wanting to learn the basic fundamentals of riding a skateboard, the 32″ Penny Lath is a decent option. They are durable and lightweight, and of similar cost to other skateboards. They are designed for cruising, with their lightweight, larger and soft wheels, which they exercise very well.

If you are a beginner wanting to learn to skateboard with the intent of learning ollies, grinds, ramp riding and more than advanced tricks, a Penny Lath volition non be a good choice for y'all. The pocket-sized size, shape, and components make learning tricks very difficult. Pick a more stable, popsicle shaped consummate if you lot want to learn tricks in the future.

I'grand an anile skateboarder and I nonetheless shred responsibly. I started skateboarding 25 years ago simply likewise love surfing, snowboarding, or anything that involves a board.